Tổng Hợp

How to use system restore on windows 10

System Restore is a legacy feature built into Windows 10 that allows users to create a snapshot of the computer’s current working state and save it as a “restore point” when important changes are detected. In the event of a critical problem after installing an update, driver, or program, or after modifying the system settings incorrectly with the Registry Editor or another tool, you can use a restore point to revert the device to an earlier point in time to fix the problem without losing your files.

Although this is a useful recovery tool, System Restore comes disabled by default, meaning that you have to enable it before the system can save restore points automatically or manually by you.

In this Windows 10 guide, we walk you through the steps to set up System Restore as well as the steps to recover from problems that may be affecting the normal operation of a computer.

How to enable System Restore on Windows 10

Windows 10 does not have System Restore turned on by default, and you must enable it manually within Control Panel.

To enable System Restore on Windows 10, use these steps:

  1. Open Start.
  2. Search for Create a restore point and click the top result to open the System Properties page.
  3. Under the “Protection Settings” section, select the main “System” drive.
  4. Click the Configure button.

    System Properties Protection Settings"

    Source: Windows Central

  5. Select the Turn on system protection option.

    Turn on system protection on Windows 10

    Source: Windows Central

    Quick tip: Windows 10 can automatically manage the space. However, under the “Disk Space Usage” section, you can also use the slider to specify the storage amount to use for recovery. You will also find a Delete button, which you can use to remove all restore points, which can come in handy to free up space or want to start over with the recovery feature.

  6. Click the Apply button.
  7. Click the OK button.

Once you complete the steps, Windows 10 will automatically create a restore point when applying a new update or when specific system changes are made.

When configuring System Restore, know that this is not a feature you can enable globally. If you have additional hard drives, you must enable the protection feature manually on each one. Only remember that the feature is meant to undo settings changes. It’s not a backup solution.

How to create a System Restore point on Windows 10

Once System Restore is enabled, it will create a checkpoint when it detects system changes automatically. However, if you plan to make configurations manually, you always want to create a restore point manually.

To create a restore point on Windows 10 manually, use these steps:

  1. Open Start.
  2. Search for Create a restore point, and click the top result to open the System Properties page.
  3. Under the “Protection Settings” section, click the Create button.

    Create system restore point option

    Source: Windows Central

  4. Type a descriptive name for the restore point — for example, before modifying the Registry settings.

    Windows 10 create restore point settings

    Source: Windows Central

  5. Click the Create button.
  6. Click the Close button.
  7. Click the OK button.
  8. Click the Close button.

After you complete the steps, you should be able to undo system changes in the event that something happens while installing a new driver, program, or applying changes to the Registry.

How to recover using System Restore on Windows 10

If something unexpected happens after installing or modifying system settings, you can use System Restore to apply a restore point to undo the changes and fix the problem. You can complete this task from the Windows 10 desktop or the advanced startup settings if the computer no longer starts correctly.

Undo system changes from desktop

If you have access to the Windows 10 desktop, you can revert the system changes using these steps:

  1. Open Start.
  2. Search for Create a restore point, and click the top result to open the System Properties page.
  3. Click the System Restore button.

    Windows 10 start system restore

    Source: Windows Central

    Quick note: If the option is grayed out, it means that the system does not have any restore point available.

  4. Click the Next button.
  5. Select the restore point to undo changes and fix problems on Windows 10.

    Restore points

    Source: Windows Central

  6. Click the Scan for affected programs button to confirm the apps that will be removed because they were added after creating the restore point.
  7. Click the Close button.
  8. Click the Next button.
  9. Click the Finish button.

    Windows 10 complete system restore

    Source: Windows Central

Once you complete the steps, System Restore will apply the restore point returning the computer to the previous good working state. If one or more apps were affected, remember to reinstall them again after the recovery process.

Undo system changes from Advanced startup

If the computer does not start correctly, you can use Advanced startup settings to access the System Restore feature to recover your Windows 10 installation.

Access Advanced startup

To access the Windows 10 Advanced startup environment to use System Restore, use these steps:

  1. Start the device.
  2. As soon as the Windows logo appears on the screen, press the power button to interrupt the boot sequence.

    Windows 10 boot logo

    Source: Windows Central

  3. Repeat steps No. 1 and 2 two more times. (Or until the device boots into the recovery experience.)

After you complete the steps, you can use the steps below to revert system changes with System Restore.

Alternatively, if you cannot access the recovery environment with the above steps, you can start the computer with a Windows 10 installation media, and while in the “Windows Setup” experience, click the Next button, click the Repair your computer button from the bottom-left corner, and then use the steps below.

Undo changes with System Restore

To use System Restore from the Advanced startup environment on Windows 10, use these steps:

  1. Click the Advanced options button.

    Automatic Repair Advanced Options

    Source: Windows Central

  2. Click on Troubleshoot.

    Advanced Startup Troubleshoot

    Source: Windows Central

  3. Click on Advanced options.

    Troubleshoot Advanced Options

    Source: Windows Central

  4. Click on System Restore.

    Advanced Options System Restore

    Source: Windows Central

  5. Select your Windows 10 account.
  6. Confirm the account password.

    Advanced startup confirm account password

    Source: Windows Central

  7. Click the Continue button.
  8. Click the Next button.

    Advanced startup System Restore

    Source: Windows Central

  9. Select the restore point to revert changes and fix problems with the computer.
  10. Click the Scan for affected programs button to confirm the apps that will be removed because they were added after creating the restore point.
  11. Click the Close button.
  12. Click the Next button.
  13. Click the Finish button.

    Windows 10 advanced startup complete system restore point

    Source: Windows Central

Once you complete the steps, the restore point will apply to undo system changes that may be causing problems with the computer, including preventing it from starting correctly.

We are focusing this guide on Windows 10, but since this is a legacy feature, you can also refer to these instructions if you use Windows 8.1 or Windows 7.

System Restore is only a feature to recover a device from configuration problems quickly. It is not a feature to replace a backup solution or an option to reset the computer to the factory default settings.

More Windows resources

For more helpful articles, coverage, and answers to common questions about Windows 10 and Windows 11, visit the following resources:


Hướng dẫn cách RESET lại win 10, Recovery khôi phục cài đặt gốc win 10


Cách reset win 10 là chúng ta khôi cài đặt gốc win 10 trở về trạng thái ban đầu như lúc mới cài win và vẫn dữ được driver máy tính, giúp máy tính chạy ổn định và mướt mà hơn.
Tính năng recovery win 10 là một tính năng vô cùng tuyệt vời, khi máy tính laptop win 10 bị lỗi hay chạy chậm đi chúng ta có thể reset win 10 lại giúp máy tính trở về trang thai ban đầu giúp máy tính chạy nhanh hơn.
Việc reset lại win 10 cũng khá là đơn giản tuy nhiên mọi người cũng phải chú ý không thì sẽ bị xóa toàn bộ file trên máy tính đó nhé.
Reset win 10 rất tiện và dễ dàng không cần phải sử dụng usb, tuy nhiên đối với những máy win bị lỗi, có phần mềm không tương thích… khiến chúng ta không thể reset lại win 10 được thì mọi người có thể xem cách cài win 10 tại đây để thay thế: https://bit.ly/34W0PBa
Trong video mình đã hướng dẫn chi tiết cho mọi người để mọi người biết cách Reset lại win 10 một cách dễ dàng, cùng theo dõi video nhé!
Chúc mọi người thành công!

Nếu các bạn thấy video hay đừng ngần ngại hãy click nút like và đăng kí theo dõi để mình có thêm động lực cho ra những video hay hơn cho các bạn. Cám ơn mọi người 🙂
Kênh Hướng Dẫn nơi chia sẻ nhũng thông tin hữu ích về máy tính, phần mềm, word, excel…
Đăng ký kênh miễn hoàn toàn phí tại: http://bit.ly/2vy8fNf

Tham gia nhóm để được hỗ trợ về máy tính
https://www.facebook.com/groups/thuthuatphammemhoidaptinhocsphn2/

Liên hệ
FB CN: https://www.facebook.com/av.8888
Fanpage: https://www.facebook.com/nguyenngocviet886/
Web : http://kenhit.vn/

Xem thêm bài viết thuộc chuyên mục: Tổng Hợp
Xem thêm bài viết thuộc chuyên mục: Tổng Hợp

Related Articles

Trả lời

Email của bạn sẽ không được hiển thị công khai.

Back to top button